Japanese | English | Sitemap
HOME > Product > Static eliminator > Phased array ionizer

Product Informatoin



Clean space construction Dust removal Static elimination Monitoring and control Medical-related or others

Space

BarSpecial barGunDesktopAdjust hoseSpotWireless groundExplosion proofSpecific application

Phased Array Ionizer for Space Ionizing

NEW

ENVIRONMENT TRINC Features Applications
TAS-825 ENV •Clean environment
•Static-free environment
•New environmental standard
•Factory
•Office
•Hotel
Clean. Static-free
To realizes a new environmental standard for factories, offices and living spaces.
ENVIRONMENT TRINC
TAS-825 ENV
Clean. Static free
Converting the factory and office into that of the new environment standard
Features Applications
  • ■Clean environment
  • ■Static free environment
  • ■New environment standard
  • ■Factory
  • ■Office
  • ■Hotel
  • ■Commercial facilities
  • ■Hospital
  • ■Domestic use
TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.




TRINC proposes a new environmental standard.
We are convinced that cleanliness and static-free level should be increased in addition to the conventional temperature and humidity control. The entire plant where they handle the precision equipment must be clean and static-free. At offices and hospitals, even in department stores, the clean and static-free is an important issue. ENVIRONMENT TRINC realizes a state of dust-free and static-free and offers a clean and comfortable space.

Clean
TRINC provides a clean space where floating dust in the air does not adhere to the products and prevents the defects caused by dirt or foreign matter.
Static free
This product emits positive and negative ions to the broad area and eliminates static electricity charged on everything in the area. In this way it not only prevents the damages caused by static electricity and electrical shocks to workers but also provides a comfortable working space.

Feature 1

Fouling with dust, dust related failures and dust mixing-in are app prevented.
ENVIRONMENT TRINC neutralizes the static charge not only on the objects but on the dust floating in the air. So, the force of the objects to attract the dust does not arise and no more dust adherence to the objects. Same as dust adherence is reduced in the clean room, ENVIRONMENT TRINC prevents the adherence of dust.

Feature 2

(Static-Free) The static-free environment is realized without air assistance.
In winter humidity gets low to keep the air dry. Static electricity becomes more common around us and more accidents in the factory resulting from the damaged semiconductors due to static are observed. And in the offices, computers and other electronic devices start experiencing more troubles, and in the hotel people become annoyed with an electrical shock from touching the door knob. Unlike the air-purifiers and air-conditioners those blow out air, ENVIRONMENT TRINC emits ions to the space without an assistance of air-blow and creates a comfortable static-free environment.

Feature 3

Humidification is not required.
Because higher humidity holds down static, humidification inside the factory has been common as an antistatic measure. But there are the factories that cannot raise humidity higher, or the cases that moisture can affect product quality. TRINC has established an antistatic measure effective even in the dry environment (non humid air) by neutralizing static. This shows a large ionizing ability without using any means like moisture.

Feature 4

Wearing dust-free garments and masks in the clean room is not necessary anymore.
When entering the clean room, workers are required to wear dust-free garments (clean suits) or masks. Because it prevents dust from emanating from the human body. ENVIRONMENT TRINC eliminates the need of use of dust-free garments or masks anymore. The space is filled with ions, the dust is neutralized even if it is emanated from the worker and would no longer adhere to the objects.

Feature 5

Wrist strap is not required.
In the electronics factories wrist strap is required for the worker to wear for discharging static electricity. ENVIRONMENT TRINC neutralizes the static charge on the human body with ions released into the air, so the wrist strap is no more required.

Feature 6

Air-assisted ionizers is not required.
In the common electronics factories, ionizers those blow air to the objects to remove the static electricity have been used. But blowing air raises the staying dust around and pollutes environment. At the same time blow-air sprays the dust to the object causing defect. ENVIRONMENT TRINC resolves the fatal problems those factories have been facing so long time.  


PHASED ARRAY IONIZER Features Applications
(HIGH ACCURACY MODEL)
TAS-821 SFS
•Static elimination for ultra-wide space
•No-Blow ionizing
•Ultra low power consumption
•Semiconductor
•Electronic device
•LCD panel
Static charges in the space are all neutralized powerfully.
For anti-static and anti-dust measures in every field.
PHASED ARRAY IONIZER (HIGH ACCURACY)
TAS-821 SFS
Static charges in the space are all neutralized with high-accuracy.
For antistatic and anti-foreign-materials measures in the field of electronics and medical care.
Features Applications
  • ■Static-free environment generated
  • ■FPD panel conveyor
  • ■Consumer electronics
  • ■Installation into equipment
  • ■sheet and film manufacturing
  • ■Glass manufacturing factory
  • ■Printing factory
  • ■Painting process
  • ■Food factory
  • ■Medicament factory
  • ■Dressing room
  • ■Powdered products factory
  • ■Plastic factory
  • ■Textile factory
  • ■Wrapping, packing factory
  • ■Hospital, Office, Hotel
TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.



Realize the environment where dust does not adhere to the objects by eliminating static electricity of dust.

Realize a wall-less clean room.
All the dust and particles become static-free.

"Why dust adheres to work piece?"
TRINC has focused attention on this fundamental question and has analyzed its adherence mechanism. As a result we found out that it is an electrically charged dust (activated dust) that adheres to the work. In other words, the dust adherence can be avoided by eliminating static charges on the dust floating in the space. We must avoid air-blow because air-blow diffuse dust and particles around. From this, the TRINC's idea "Room-less Clean Room = Wall-less Clean Room" has been borne.


Environmental preservation compliance models(RoHS)

These models complying with RoHS directives for environmental make you feel further assured in operation.


Feature 1

The static-free environment is realized without air assistance.
Product defects due to static occur frequently in the season when humidity gets low. So anti-static measures are indispensable to keep stable production and quality. TRINC PHASED ARRAY IONIZER (to dissipate static) a work space in whole to make it the static-free environment like the rainy season.

Feature 2

Overwhelmingly low cost compared to clean rooms.
Not only is a high initial investment required to introduce a clean room into the factory, but the management gets to worry about a high running cost after instruction. Phased Array Ionizer is best suited for those who think that they don't necessarily need a clean room but are always worried about dust-related problems. Phased Array Ionizer is a wall-less clean room. Ordinary clean rooms are designed to prevent dust from coming into the room from outside, but Phased Array Ionizer was developed from a reversal thinking. That is, if floating dust in the space doesn't adhere to objects, there would be no dust-related defects, because dust adhesion is a result of static attraction charged on dust and objects. So neutralizing of those static was thought to be a solution. It was turned to be right and dust adhesion was reduced drastically, and "Room-less (wall-less) Clean Room” was borne.

Feature 3

Humidification is not required.
Because higher humidity holds down static, humidification inside the factory has been common as a antistatic measure. But some of them cannot raise humidity higher, or moisture can affect product quality. TRINC has established an antistatic measure effective even in the dry environment (non humid air) by neutralizing static. This displays a large ionizing ability without using any mediums like moisture.

Feature 4

Workers are freed from a wrist strap.
Workers are freed from the wrist strap that has long been used as an antistatic measure in mankind's history. This is a landmark event, since workers can walk around freely unbounded with a leash. The new factory style adopted in the "cell production" and "new innovative production" systems is a worker-centered world, and the obsolete image that workers are working tied to a leash has been renewed to free-walking-around. Phased Array Ionizer diffuses ions in every corner inside the factory so that atmospheric ions are floating everywhere inside the factory. In other words, the inside air starts to have conductivity, and the instant that human body or object gets charged with static, the ions floating nearby are absorbed to it to have the static dissipated into the air. A wrist strap has been no more required to ground the human body. Workers are freed from it.

Feature 5

No-Blow TRINC reduces the dust-related defects.
TRINC has embodied its leading motive, "Air is useless for ionization." It's a mistaken stereotype that ionization cannot be done without assistance of air. In reality, air is an adversary to the clean environment. It is the ions that ionization needs, and air is useless. TRINC has proposed "No-Blow Ionization" to defy the prevailing mistaken stereotype and enjoyed reputation from many worksites.

Feature 6

Layout can be changed freely.
A pair of Phased Array Ionizers set as a minimum unit, a combination of multiple units makes the effective space unlimited. The static-free space can be extended at will. Tailoring the space to factory layout, any configuration of the effective space can be made freely.
To make the best use of ion polarity in ionizing, it is necessary to synchronize the polarity of ionizers. TAS-821/823 SFS series are equipped with the dedicated link ports so that multiple ionizers are linked easier. The positive and negative ions emitted from each ionizer are well synchronized to make it possible to eliminate static powerfully and extensively.

Feature 7

One-touch needle cleaning function.
With the brush arrayed alongside each discharge needle, dozens of needles can be cleaned in a lump just by pulling aside the lever located at the back of the bar. This clears up both lowering ionizing effect due to needle fouling and troublesome cleaning problems once for all.

Feature 8

A high ion balance secured by ion sensors.
A sensor senses the amount of ions generated to keep the ion-balance at a steady level.

Feature 9

Remote controlling function
With the main switch kept on, ON/OFF action of ion discharge can be controlled rough the outgoing signal. Because the ion discharge can be made as needed, not only can maintenance of needle cleaning be reduced, but needle service life can be prolonged for higher energy-saving effect.

Feature 10

"ERROR" signal sending out
Needle wear-out and abnormal discharging like an electric leak caused by foreign bodies are detected. The ERROR LED on the display panel starts flashing to alert operators visibly to the problems. The error signal can be output to an external device so that the error is notified even if the ion bars are mounted remotely.


Effective ionising area of Phase Array Ionizer (High Accuracy Model)

Bar size 550 690 830 1250 1810 2230
 Depth(mm) 3000
 Width(mm) 6000
 Height(mm) 1400 1500 1700 2400 3000 4000
Ionizing performance
(No-blow・20pF・Measured at the center of 2000mm between the bars)
42seconds 28seconds 14seconds
PHASED ARRAY IONIZER Features Applications
TAS-811 SFS •Static elimination for ultra-wide space
•No-blow ionizing
•Ultra low power consumption
•Painting, Assembly
•Chemical, Phermaceutical
•Cleanroom, Changing room
Construction of static-free space in which dust doesn't adhere to products.
PHASED ARRAY IONIZER
TAS-811 SFS
Miracle achievement of static and foreign matter defect reduction.
Features Applications
  • ■Super wide area static ionizing
  • ■No-Blow ionizing
  • ■Super low power consumption
  • ■One-touch cleaner
  • ■Amazingly multi-purpose use
  • ■Painting factory
  • ■Assembling plant
  • ■Pharmaceutical factory
  • ■Dust-proof dressing room
  • ■Clean room
  • ■Office
  • ■Chemical factory
TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.



Realize the environment where dust does not adhere to the objects by eliminating static electricity of dust.

Realize a wall-less clean room. All the dust and particles become static-free.

"Why dust adheres to work piece?"
TRINC has focused attention on this fundamental question and has analyzed its adherence mechanism. As a result we found out that it is an electrically charged dust (activated dust) that adheres to the work. In other words, the dust adherence can be avoided by eliminating static charges on the dust floating in the space. We must avoid air-blow because air-blow diffuse dust and particles around. From this, the TRINC's idea "Room-less Clean Room = Wall-less Clean Room" has been borne.


Complying with EC directive and CE Marking
Complying with Low Voltage and EMC directives.

Environmental preservation compliance models(RoHS)
These models complying with RoHS directives for environmental preservation make you feel further assured in operation.


Feature 1

The static-free environment generated without air-assist
Product defects due to static occur frequently in the season when humidity gets low. So anti-static measures are indispensable to keep stable production and quality. Phased Array ionizes (to dissipate static) a work space in whole to make it the static-free environment like the rainy season.

Feature 2

Overwhelmingly low cost compared with clean room.
Not only is a high initial investment required to introduce a clean room into the factory, but the management gets to worry about a high running cost after instruction. Phased Array Ionizer is best suited for those who think that they don't necessarily need a clean room but are always worried about dust-related problems. Phased Array Ionizer is a wall-less clean room. Ordinary clean rooms are designed to prevent dust from coming into the room from outside, but Phased Array Ionizer was developed from a reversal thinking. That is, if floating dust in the space doesn't adhere to objects, there would be no dust-related defects, because dust adhesion is a result of static attraction charged on dust and objects. So neutralizing of those static was thought to be a solution. It was turned to be right and dust adhesion was reduced drastically, and "Room-less (wall-less) Clean Room was borne.

Feature 3

Humidification is not required.
Because higher humidity holds down static, humidification inside the factory has been common as a antistatic measure. But some of them cannot raise humidity higher, or moisture can affect product quality. TRINC has established an antistatic measure effective even in the dry environment (non humid air) by neutralizing static. This displays a large ionizing ability without using any mediums like moisture.

Feature 4

Workers are freed from a wrist strap.
Workers are freed from the wrist strap that has long been used as an antistatic measure in mankind's history. This is a landmark event, since workers can walk around freely unbounded with a leash. The new factory style adopted in the "cell production" and "new innovative production" systems is a worker-centered world, and the obsolete image that workers are working tied to a leash has been renewed to free-walking-around. Phased Array Ionizer diffuses ions in every corner inside the factory so that atmospheric ions are floating everywhere inside the factory. In other words, the inside air starts to have conductivity, and the instant that human body or object gets charged with static, the ions floating nearby are absorbed to it to have the static dissipated into the air. A wrist strap has been no more required to ground the human body. Workers are freed from it.

Feature 5

No-Blow TRINC reduce the defect caused by dust.
TRINC has embodied its leading motive, "Air is useless for ionization." It's a mistaken stereotype that ionization cannot be done without assistance of air. In reality, air is an adversary to the clean environment. It is the ions that ionization needs, and air is useless. TRINC has proposed "No-Blow Ionization" to defy the prevailing mistaken stereotype and enjoyed reputation from many worksites.

Feature 6

Layout can be changed freely.
A pair of Phased Array Ionizers set as a minimum unit, a combination of multiple units makes the effective space unlimited. The static-free space can be extended at will. Tailoring the space to factory layout, any configuration of the effective space can be made freely.
To make the best use of ion polarity in ionizing, it is necessary to synchronize the polarity of ionizers. TAS-821/823 SFS series are equipped with the dedicated link ports so that multiple ionizers are linked easier. The positive and negative ions emitted from each ionizer are well synchronized to make it possible to eliminate static powerfully and extensively.

Feature 7

One-touch cleaner function.
With the brush arrayed alongside each discharge needle, dozens of needles can be cleaned in a lump just by pulling aside the lever located at the back of the bar. This clears up both lowering ionizing effect due to needle fouling and troublesome cleaning problems once for all.


Effective ionizing area of Phased Array Ionizer

Bar size 155 250 390 530 950 1510 1930
 Depth(mm) 3000
 Width(mm) 6000
 Height(mm) 1300 1400 1500 1700 2400 3000 4000
Ionizing performance
(No-blow・20pF・Measured at the center of 2000mm between the bars)
42seconds 28seconds 14seconds


PHASED ARRAY SMART IONIZER Features Applications
TAS-810 SMT-SFS •Wide area static elimination
•No-blow ionizing
•No need of wrist strap
•Semiconductor, Electronics
•Plastic
•Pharmaceutical, Cosmetic
No-Blow Ionizing. High accuracy ionizing.
Totally zero static circumstances including workers.
Drastically reduced dust attachment.
PHASED ARRAY SMART IONIZER
TAS-810 SMT-SFS
No-Blow lonization. High accuracy ionizing.
Totally zero static circumstances including workers.
Drastically reduced dust attachment.
Features Applications
  • ■High accuracy ionizing
  • ■Anti-dust measures
  • ■Wrist strap is not required
  • ■No ion-shade made
  • ■No-Blow ionizing
  • ■Wide range static elimination
  • ■Semiconductors field
  • ■Electric-appliance field
  • ■Plastics field
  • ■Food processing
  • ■Chemicals field
  • ■Cosmetics field
  • ■Printings field
TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.




We at TRINC have once kept our eyes on the fundamental question, "why does dust adhere to workpieces?" and elaborated the analysis of its mechanism. It revealed that the floating dust charged with static was attracted to adhere to them. In other words, if we dissipate the static charge on it by ionizing the whole space including it without blow (Static-Free Space Ionizing by No-Blow TRINC), we can avoid dust adherence. Since blowing raises and sprays dust over workpieces, it has to be avoided. From this thought, a TRINC'S unique product, PHASED ARRAY SMART IONIZER, has born.

Feature 1

The static-free working space covered totally with ions of the desktop type TRINC Phased Array Smart Ionizer.
Effective coverage: 1,600mm(width)×900mm(depth)

Feature 2

High accuracy static elimination
A high accuracy ion-balance ensures safe ionizing even on precision electronics instruments and devices. The ion-balance pulsation that has been shortcomings on the pulse-type ionizer is not on this model.

Feature 3

Drastically reduced dust-related defectives by adoption of No-Blow TRINC
This device has nothing to do with the known shortcomings, "rather increasing dust-related defects," on Fan-type or Blow-type ionizers.

Feature 4

Dust-attraction prevention
Through the process to get everything in the space including floating dust ionized, dust-attraction is prevented.

Feature 5

Micro-mini desktop type ionizer
An ultra slim and light body makes it possible to be located at the far end of the workbench so as not to bother with the bench layout.

Feature 6

No ion-shade made
The ions emanated from right-and-left ionizers covers all over surfaces of the work leaving no shade.

Feature 7

Wrist strap is not necessary.
The static charged not only on the products but on the worker's body is eliminated uniformly, the obsolete antistatic goods such as wrist straps, conductive floors are no more wanted

Feature 8

Tracking (burnt deposits)-less operation owing to the Leak-Free
Because no air is used, the electric system is free from an electric leak and its resultant breakdown or fire.

Feature 9

Easy maintenance
Because no electric leak occurs, needles are easily cleaned with an attached brush.

Feature 10

Installable into machinery
A super multipurpose design allows it to be used in almost all fields and processes.

Feature 11

Usable even at dusty worksites
A dust-proof device capable of attaching to this STATIC-FREE SPACE SMART TRINC is available as an optional part.





Effective ionizing area of PHASED ARRAY SMART IONIZER

Width (mm) 1600
Depth (mm) 900
Height (mm) 500
Ionizing performance Approx. 5 seconds(measured at center, 600mm off, with a charged monitor set at 20pF without air)


HIGH HEAT RESISTANT Features Applications
PHASED ARRAY IONIZER
TAS-804 SFS-HT200
•Ultra wide static elimination
•No-blow ionizing
•Heat resistant
•Drying oven
•Chemical
•Phermaceutical
No-blow static elimination in high temperature spaces such as drying ovens
PHASED ARRAY IONIZER (High heat-resistant 200°C)
TAS-804 SFS-HT200
A pair of static ionizers eliminates static electricity without air-blow inside the high temperature space like the drying furnace.
Features Applications
  • ■Super wide area static ionizing
  • ■Super low power consumption
  • ■No-Blow ionizing
  • ■Heat-resistant construction
  • ■Painting factory (Drying furnace)
  • ■Assembling plant
  • ■Chemical factory
  • ■Pharmaceutical factory



Magic for dust-proof measures “Invisible Clean Room"
A wall-less clean room born of TRINC's “Room-less Clean Room theory," has heaped up remarkable results in cutting off the defects resulting from static and dust in the various cases.

TRINC had given an eye to the fundamental issue of why dust adhered to work pieces and analyzed the mechanism of the dust being attracted to them. And it reached the conclusion that dust adhesion could be avoided if the whole space including the floating dust was ionized all together.
This is the concept of Phased Array Ionizer and "High Heat-resistance type Phased Array Ionizer" is the model to which the heat-resistance of 200°C is added. A wall-less clean room usable inside the high temperature environment, an anti-dust measure which never allow floating dust to adhere to work pieces becomes available.

Feature 1

Stainless steel made ion bars
The ion bars located close to work pieces for ion emission over them is made of stainless steel. Re-examining materials used for the needle holders and wiring and their structures, the ion bar is made assured of its heat resistance up to 200℃. The air-free ionizing does not require the build-in fan which lacks a heat-resistance, and contributes largely to assuring the heat -resistance as well.

Feature 2

Remotely controlled high voltage generating unit
The high voltage generating unit is isolated from the ion-bar. Placing the ion bar close to the work pieces which requires to be ionized and having the high voltage generating unit close at operator's hand, the system can be operated with the ion-bar alone put into the inaccessible place. The main control unit, commonly used for a bar type ionizer (Bar TRINC) and a phased array ionizer (TRINC PHASED ARRAY IONIZER), has a function synchronizing the polarity of neighboring ionizers with an excellent extensibility.

Feature 3

“Bo-blow ionizing" prevents temperature change.
This is a TRINC's unique system that diffuses ions by means of Coulomb’s repulsion. The ion-diffusion system used in ordinary ionizers emits ions towards work pieces on the air from a build-in fan or a compressor. But this air blow incurs unevenness and cooling down of temperature on the injection molding dies or high-temperature drying furnace to create a new problem. The air-free ionizing makes it possible to eliminate static without worrying about the temperature change.

Feature 4

Layout can be changed freely
The whole working space can be ionized thoroughly through a control of ion polarities. Making a pair of ion bars as a minimum Static-free Space TRINC unit, the space can be expanded infinitely by a combination of multiple units. By making use of the attraction and repulsion worked on both ions (positive and negative), the furnace with any complicated shape can be fil led with ions effectively.


APPROVED EXPLOSION-PROOF PHASED ARRAY IONIZER Features Applications
PHASE ARRAY IONIZER
TAS-83 SFS-EPA
•Explosion-proof
•Ultra-wide static elimination
•High reliability and easy maintenance
•Painting, Printing
•Chemical
•Powder
A new approved explosion-proof PHASED ARRAY IONIZER for anti-static/dust measures in dangerously flammable atmosphere.
APPROVED EXPLOSION-PROOF PHASED ARRAY IONIZER
TAS-83 SFS-EPA
Much safer with further intensified explosion-protection performance.
A new approved explosion-proof ionizer for anti-static/dust measures in the dangerously flammable atmosphere.
Features Applications
  • ■Explosion-proof
  • ■Super wide area ionizing
  • ■Super low power consumption
  • ■One-touch cleaner
  • ■Painting / Printing
  • ■Tire manufacturing
  • ■Petrochemical plant
  • ■Fine particle manufacturing
  • ■Rubber manufacturing
  • ■Car body repairing
TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.



The more flammable a location is, the more likely static is built up. Once an explosion or a fire occurs, all the measures taken go back to square one. TRINC has developed a new approved explosion-proof ionizer "PHASED ARRAY TRINC" with a further improved explosion-protection performance as compared with the conventional.

Feature 1

Feature
Prevention of explosion by static.
Under the material processing environment filled with solvent vapor and scattering particles, the spark caused by static would lead directly to an explosion or fire. So the antistatic measures are indispensable for safety and efficient operation. The Approved Explosion-proof type ionizer, which has been proved in the various production sites, promises the explosion or fire-free environment as well as safe and high efficiency operation.

Feature 2

Prevention of quality from being damaged by static and dusts
The dusts sticking to work piece largely affect the paint surface finishing quality. However, what is really needed for the painting in the environment including flammable solvents is the anti-static/dust measures with assured explosion-proof. The Approved Explosion-proof TRINC dissipates the static charged on products with powerful ions to prevent the dust-related defects.

Feature 3

One-touch needle cleaning function
Most static ionizers installed inside equipment have faced a problem that they reduce gradually ion-discharging. This is because they are located out of reach for daily maintenance and the dust piled up on needles prevents ions from being discharged. As a result, static elimination becomes ineffective and product defect rate grows higher. Putting itself in customer’s shoes, TRINC has developed a static ionizer with a manual cleaning system. With a one-touch to turn the grip mounted on the edge of the ion-bar, a dozen of needles are cleaned in a lump. This is a patent TRINC is granted first in the field.

Feature 4

Various sizes available
The ion-bars are available in 3 sizes; 500, 1,000 and 1,500mm. This enables customers to choose the ion-bar to match their purposes for ionizing in a wide space to that in a narrow inside of the equipment.

Feature 5

Warning function for cleaning discharge needles
If the discharge needle becomes dirty, the static electricity removal capacity decreases and it will not be possible to sufficiently remove static electricity. The EXPLOSION-PROOF BAR TRINC detects the dirt on the discharge needle and turns on the cleaning LED of the discharge needle. By performing maintenance (cleaning, discharge needle replacement, etc.) of the discharge needle, it can always be used in good condition without causing a decrease in static elimination capacity.

Feature 6

Warning function for overhaul
The overhaul LED lights up when 4 years have passed in the actual working time (cumulative). By overhauling, it will return to the initial condition.       *Overhaul will be done by TRINC.


総合お問合せ窓口

Phased Array Ionizing”, “No-Blow Ionizing”, “Ion Engine”, “Slight-Air Ionizing” are registered trademark (in Japan) of TRINC Corporation, a forerunner of this field.

Announcement
• Recruiting
• Demo Center Network
• New Product Information
• Event Information
• Media Information
• Promotion Videos
• Applications

 
Link
• TRINC Consulting
• TRINC Library
• TRINC METHOD
• Static Electricity / Dust Book
• Static Electricity Museum
• Story of Static Electricity

 
Contact us
• General Inquiry Counter
• Inquiry about product
• Price Inquiry
• Inquiries about distributors
• Online demonstration and disucussion
• Demo Center Visit Reseravation
• Anything Consultation


Support
• Products User Registration
• After-Sales Service

Related Brand
• LOHEN

SNS
• Facebook
• YouTube