Japanese | English | Sitemap
HOME > Product > Clean environment > Clean bench

Product Informatoin



Clean space construction Dust removal Static elimination Monitoring and control Medical-related or others
Cleanroom

Clean bench

Phased array ionizerDesktop cleanDuct collection w/o air flow

Clean Bench

CLEAN DESKTOP TRINC Features Applications
TAS-1230 CDT-HP4040 TAS-1231 CDT-HP6060
TAS-616 CDT-MP4040 TAS-1232 CDT-MP6060
TAS-617 CDT-PP4040 TAS-1233 CDT-PP6060
•Class 1 cleanliness only in 1 min.
•Built in static eliminator
•Easy maintenance
•Optical components
•Precision device
•Electronic device

Your desk turns directly into a Clean Bench! It realizes the cleanliness of lower than "Class 1" in mere 1 minute!
CLEAN DESKTOP TRINC
TAS-1230 CDT-HP4040 / TAS-616 CDT-MP4040 / TAS-617 CDT-PP4040
TAS-1231 CDT-HP6060 / TAS-1232 CDT-MP6060 / TAS-1233 CDT-PP6060

Your desktop turns directly into a super clean bench! It realizes the cleanliness of lower than "Class 1" in mere 1 minutes!
Features Applications
  • ■No dust-free garment required!
  • ■The cleanliness of lower than "Class 1" is realized in mere 1 minute
  • ■A replaceable filter adopted on the front face of the air outlet and inlet units
  • ■Equipped with a static ionizer
  • ■Compact and lightweight for space saving
  • ■Wind engine located under the workbench
  • ■Optical apparatus assembling
  • ■Precision instruments assembling
  • ■Electrical parts assembling
  • ■Inspection
TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.



A clean bench defying traditional common sense has come on stage.
"This is called “clean desktop" for the fact that the desktop workspace you are working on changes instantly into a clean space once you place this simply on the far corner of it. A clean bench is no more required. A dust-free garment is no more needed. Not only is high cleanliness given, but extreme space saving is made economically to the extent that the maintenance of the system can be done easily on the spot even without tools.

TRINC fan type CDT TRINC rectangular type CDTR


Conventional large clean bench has been used to create a clean environment. TRINC uses a new method to make the work desk itself a clean environment.

Feature 1

No more conventional clean bench needed!
Your workbench changes quickly into a clean bench, making ordinary clean bench unwanted anymore.

Feature 2

Marvelous cleanliness is realized with marvelous quickness!
The cleanliness of lower than "Class 1" is realized in mere 1 minute.

Feature 3

No dust-free garment required!
A clean space is materialized in front of your eyes. You get free from a troublesome change of clothes into a dust-free garment that binds you all day long.

Feature 4

The best suited cleanliness realized according to the application
1. High cleanliness (HP model)
    via a HEPA filter (outlet) and a pre-filter (inlet)
2. An economically reasonable investment and running cost realized with rational cleanliness (MP model)
    via a moderate filter (outlet) and a pre-filter (air inlet)
3. Affordable clean environments (PP model)
    via pre-filters (both outlet and inlet)

Feature 5

Longer filter operation life
The filter used on the conventional systems taking in outside air has a shorter life or requires a frequent maintenance or replacement. This device circulates inside air so that the filter's maintenance is reduced drastically to cut down the running costs.

Feature 6

A replaceable filter adopted on the front face of the air outlet and inlet units
Most conventional clean benches have their filters installed on the ceiling. So the maintenance to them has hardly been made because it involves a risk of falling down and is not easy to do regularly. On this device, the front face-loaded filters can be replaced easily without tools on the workbench.

Feature 7

Equipped with a static ionizer
Static and dust are eliminated together.

Feature 8

Air blowing also applicable
With an air-blow unit system attached to the device, the system turns to an "air-blow-cum-clean-bench” that removes such the dust as emerging out of somewhere during operation without polluting the clean environment.

Feature 9

Compact and lightweight for space saving
The clean bench taking up space is not required, so a large space-saving effect is to be achieved.

Feature 10

Wind engine located under the workbench
The Wind engine that can be a source of vibration and noise is located under the workbench so as to make the work space wider and keep the working environment comfortably.





TAS-1230 CDT-HP4040の場合
CLEAN DESKTOP TRINC Features Applications
(RECTANGULAR MODEL)
TAS-1238 CDTR-HP4040 TAS-1239 CDTR-HP6060
TAS-661 CDTR-MP4040 TAS-1240 CDTR-MP6060
TAS-663 CDTR-PP4040 TAS-1241 CDTR-PP6060
•Class 1 cleanliness only in 1 min.
•Built in static eliminator
•Easy maintenance
•Optical components
•Precision device
•Electronic device

Your desk turns directly into a Clean Bench! It realizes the cleanliness of lower than "Class 1" in mere 1 minute!
CLEAN DESKTOP TRINC (Rectangular type)
TAS-1238 CDTR-HP4040 / TAS-661 CDTR-MP4040 / TAS-663 CDTR-PP4040
TAS-1239 CDTR-HP6060 / TAS-1240 CDTR-MP6060 / TAS-1241 CDTR-PP6060

Your workbench changes quickly into a clean bench.
The cleanliness of lower than "Class 1" is realized in mere 1 minute.
Features Applications
  • ■No dust-free garment required!
  • ■The cleanliness of lower than "Class 1" is realized in mere 1 minute
  • ■A replaceable filter adopted on the front face of the air outlet and inlet units
  • ■Equipped with a static ionizer
  • ■Compact and lightweight for space saving
  • ■Wind engine located under the workbench
  • ■Optical apparatus assembling
  • ■Precision instruments assembling
  • ■Electrical parts assembling
  • ■Inspection
TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.



A clean bench defying traditional common sense has come on stage.
"This is called “clean desktop" for the fact that the desktop workspace you are working on changes instantly into a clean space once you place this simply on the far corner of it. A clean bench is no more required. A dust-free garment is no more needed. Not only is high cleanliness given, but extreme space saving is made economically to the extent that the maintenance of the system can be done easily on the spot even without tools.

TRINC fan type CDT TRINC rectangular type CDTR


Conventional large clean bench has been used to create a clean environment. TRINC uses a new method to make the work desk itself a clean environment.

Feature 1

No more conventional clean bench needed!
Your workbench changes quickly into a clean bench, making ordinary clean bench unwanted any more.

Feature 2

Marvelous cleanliness is realized with marvelous quickness!
The cleanliness of lower than "Class 1" is realized in mere 1 minute.

Feature 3

No dust-free garment required!
A clean space is materialized in front of your eyes. You get free from a troublesome change of clothes into a dust-free garment that binds you all day long.

Feature 4

The best suited cleanliness realized according to the application
1. High cleanliness (HP model)
    via a HEPA filter (outlet) and a pre-filter (inlet)
2. An economically reasonable investment and running cost realized with rational cleanliness (MP model)
    via a moderate filter (outlet) and a pre-filter (air inlet)
3. Affordable clean environments (PP model)
    via pre-filters (both outlet and inlet)

Feature 5

Longer filter operation life
The filter used on the conventional systems taking in outside air has a shorter life or requires a frequent maintenance or replacement. This device circulates inside air so that the filter's maintenance is reduced drastically to cut down the running costs.

Feature 6

A replaceable filter adopted on the front face of the air outlet and inlet units
Most conventional clean benches have their filters installed on the ceiling. So the maintenance to them has hardly been made because it involves a risk of falling down and is not easy to do regularly. On this device, the front face-loaded filters can be replaced easily without tools on the workbench.

Feature 7

Equipped with a static ionizer
Static and dust are eliminated together.

Feature 8

Air blowing also applicable
With an air-blow unit system attached to the device, the system turns to an "air-blow-cum-clean-bench” that removes such the dust as emerging out of somewhere during operation without polluting the clean environment.

Feature 9

Compact and lightweight for space saving
The clean bench taking up space is not required, so a large space-saving effect is to be achieved.

Feature 10

Wind engine located under the workbench
The Wind engine that can be a source of vibration and noise is located under the workbench so as to make the work space wider and keep the working environment comfortably.


AIR-BLOW DESKTOP TRINC Features Applications
TAS-1234 ADT-HP4040 TAS-1235 ADT-HP6060
TAS-622 ADT-MP4040 TAS-1236 ADT-MP6060
TAS-623 ADT-PP4040 TAS-1237 ADT-PP6060
•Ideal cleaning environment
•Built in static eliminator
•Compact and lightweight
•Optical components
•Precision device
•Electronic device

Turning a corner of your workbench itself into a high performance dust-Removing Box!
AIR-BLOW DESKTOP TRINC
TAS-1234 ADT-HP4040 / TAS-622 ADT-MP4040 / TAS-623 ADT-PP4040
TAS-1235 ADT-HP6060 / TAS-1236 ADT-MP6060 / TAS-1237 ADT-PP6060

A corner of your worktable turns directly into an air-blow bench!
A thorough cleaning ... done with no dust intruded from outside!
Features Applications
  • ■A thorough dust cleaning
  • ■Opening up a desktop
  • ■Dust cleaning on the spot
  • ■Equipped with a static ionizer
  • ■Compact and light weight
  • ■Fan-motor unit located under the workbench
  • ■Remove dust during working process.
  • ■Eliminate static during working process.
TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.



On the conventional dust-removing process, the dust-removing box or the air-blow gun has been exclusively used. The use of the dust-removing box, however, comes up with a fatal flaw that it takes in the dust produced from worker's apparel or floating in the air thus to have it attached to the products. The same is true for the air-blow gun in the sense that it blows off dust into the air to contaminate the environment. TRINC has focused attention on these common errors and devised ideal solution.

TRINC fan type ADT TRINC rectangular type ADTR


Conventional type
Sucking in external dust results in attaching it to products.
TRINC Method
Since external dust is not inhaled, full cleaning can be performed.


Feature 1

A thorough dust cleaning--- No dust intrusion from outside nor dust reattachment
Unlike conventional dust-removing boxes, this device neither suck in the dust emerging from worker's apparel or floating around in the air nor arrow it to reattach to products.

Feature 2

Opening up a desktop --- placing just on a far corner of the desktop!
This device doesn't take up the desktop as seen on the conventional dust-removing box.

Feature 3

A thorough dust cleaning --- retrieving the dust blown off products.
The dust blown off would never contaminate the environment.

Feature 4

Dust cleaning --- done on the spot without sending it to other process
A worker is not bothered to change his workpieces to another cleaning process.

Feature 5

Equipped with a static ionizer
Static and dust are eliminated together.

Feature 6

Compact and light weight
This device wouldn't take up a workbench (desktop), but use a part of it.

Feature 7

Fan-motor unit located under the workbench
The fan-motor unit that can be a source of noise is located under the workbench so as to make a work space wide and keep the work environment comfortably.



TAS-1234 ADT-HP4040の場合
AIR-BLOW DESKTOP TRINC Features Applications
(RECTANGULAR TYPE)
TAS-1242 ADTR-HP4040 TAS-1243 ADTR-HP6060
TAS-692 ADTR-MP4040 TAS-1244 ADTR-MP6060
TAS-693 ADTR-PP4040 TAS-1245 ADTR-PP6060
•Ideal cleaning environment
•Built in static eliminator
•Compact and lightweight
•Optical components
•Precision device
•Electronic device

Turning a corner of your workbench itself into a high performance dust-Removing Box!
AIR-BLOW DESKTOP TRINC
TAS-1242 ADTR-HP4040 / TAS-692 ADTR-MP4040 / TAS-693 ADTR-PP4040
TAS-1243 ADTR-HP6060 / TAS-1244 ADTR-MP6060 / TAS-1245 ADTR-PP6060

A corner of your worktable turns directly into an air-blow bench!
A thorough cleaning ... done with no dust intruded from outside!
Features Applications
  • ■A thorough dust cleaning
  • ■Opening up a desktop
  • ■Dust cleaning on the spot
  • ■Equipped with a static ionizer
  • ■Compact and light weight
  • ■Fan-motor unit located under the workbench
  • ■Remove dust during working process.
  • ■Eliminate static during working process.
TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.



On the conventional dust-removing process, the dust-removing box or the air-blow gun has been exclusively used. The use of the dust-removing box, however, comes up with a fatal flaw that it takes in the dust produced from worker's apparel or floating in the air thus to have it attached to the products. The same is true for the air-blow gun in the sense that it blows off dust into the air to contaminate the environment. TRINC has focused attention on these common errors and devised ideal solution.

TRINC fan type ADT TRINC rectangular type ADTR


Conventional type
Sucking in external dust results in attaching it to products.
TRINC Method
Since external dust is not inhaled, full cleaning can be performed.


Feature 1

A thorough dust cleaning--- No dust intrusion from outside nor dust reattachment
Unlike conventional dust-removing boxes, this device neither suck in the dust emerging from worker's apparel or floating around in the air nor arrow it to reattach to products.

Feature 2

Opening up a desktop --- placing just on a far corner of the desktop!
This device doesn't take up the desktop as seen on the conventional dust-removing box.

Feature 3

thorough dust cleaning --- retrieving the dust blown off products.
The dust blown off would never contaminate the environment.

Feature 4

Dust cleaning --- done on the spot without sending it to other process
A worker is not bothered to change his workpieces to another cleaning process.

Feature 5

Equipped with a static ionizer
tatic and dust are eliminated together.

Feature 6

Compact and light weight
This device wouldn't take up a workbench (desktop), but use a part of it.

Feature 7

Fan-motor unit located under the workbench
The fan-motor unit that can be a source of noise is located under the workbench so as to make a work space wide and keep the work environment comfortably.
BLOW ZONE TRINC Features Applications
TAS-628 BZT •Air blow in clean room
•Collection of dust brown off
•Large working space
•Painting factory
•Assembly factory
•Clean room
Blowing air inside the factory, once loathed, has become possible! The dust blown off is all collected to keep the clean environment!
BLOW ZONE TRINC
TAS-628 BZT
Possible to use air-blow in your factory?!
The dust blown off is all collected to keep the clean environment!
Features Applications
  • ■Air-blow in a clean room
  • ■The dust blown off is all collected
  • ■Shutting out outside dust
  • ■Large-sized components can be processed
  • ■A wide working space
  • ■Transforming into the air shower room
  • ■Painting factory
  • ■Assembling factory
  • ■Dust-proof dressing room
  • ■Clean room
  • ■Chemical factory
  • ■Pharmaceutical factory
TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.


At the manufacturing facilities, blowing off dust from their products and parts have been conventionally adopted. But, because the blowing inside the facilities causes dust to spread about to break down the clean environment, they have been worried with this vicious cycle. TRINC has developed BLOW ZONE TRINC to solve this problem. Since it collects all the dust once blown off and never let it go back into the facilities again, the clean environment is maintained. In addition, those basic problems carried over from the old time, like the dust generated from clothes of workers themselves and the one continuously floating inside the facilities, have been resolved thoroughly. That is, the working area is filled with the filtered clean air being divided from the outside air, so the dust coming out from workers and staying potentially inside the factory are banned from going into the clean area. The annoying problem accompanying dust blowing conventionally is completely resolved. The combination use of this with the ROOM-LESS ION SHOWER (a simplified air-shower that removes static from workers with ionic air and blow off dust at once before their entering into the factory) composes a full-dress air-shower.

Feature 1

The dust blown off is all collected.
Conventionally blowing dust off the objects inside the factor has been prohibited strictly to avoid damaging the clean environment with dust. This apparatus collects the dust blown off the objects thoroughly, allowing the blowing inside the factory possible.

Feature 2

Shutting out outside dust
Conventional dust-removal machines have an essential problem; even if they blow off dust, they take in the dust anew the workers generate themselves and allow it to reattach to the objects, so dust problem has never been resolved. Because this apparatus fills up workplace with the clean air and shut out the fouled outside air, an absolute blowing has become possible by shutting out the dust coming out form workers and outside dust.

Feature 3

Large-sized components can be processed
Because this apparatus assures a wide working space, large-sized components like automobile components and machine cases can be blown off.

Feature 4

A wide working space
This is a stand-alone type not requiring a setting base so a fan-like wide working space can be maintained. Operators can work standing on the floor and blowing air at the objects.

Feature 5

Transforming into the air shower room
Being used in combination with the simplified-type air-shower, “ROOM-LESS ION AIR SHOWER,” this transforms into a full-dress air-shower.

Feature 6

No periodic maintenance for the filter is required

Feature 7

Removing static at the same time
Because a special ionizer is adopted, static and dust can be removed at the same time.

Feature 8

Setup space can be as small as one half as compared with the conventional devices
Both the blower and inhaler units (panels) are arrayed in fan shape with the blower side a bit made smaller. So the setup space can be decreased as small as one half as against to conventional ones.

Feature 9

Low power consumption
An ultra slim and high-efficiency wind engine (blower motor) has been developed to embody a compact with low power consumption apparatus.


NEW

CONVEYOR CLEAN BENCH Features Applications
(For machining process)
TAS-1341 CCB-HP4040 / TAS-1342 CCB-HP6060
(For operater working process)
TAS-1427 CCBW-HP6060
•Ultra clean environment
•Static-free environment
•Door-less structure
•Painting factory
•Assembly factory
•Clean room

It creates a clean environment above the conveyor to protect the object from dust adherence.
CONVEYOR CLEAN BENCH
(For robotic process) TAS-1341 CCB-HP4040 / TAS-1342 CCB-HP6060
(For operator working process) TAS-1427 CCBW-HP6060

A clean environment created above the conveyor protects the work from dust adherence.
Targeted for robotic processes (Cartesian coordinate robot and a robot arm) and an operator working process
Features Applications
  • ■High cleanliness
  • ■Prevention of dust adhering by Phased Array ionizing
  • ■Compact
  • ■Does not contaminate the factory
  • ■Little maintenance required
  • ■Door-less structure
  • ■Optical apparatus assembling
  • ■Precision instruments assembling
  • ■Electrical parts assembling
  • ■Inspection
TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.



In industry, a clean bench means a stand-alone type compartment surrounded by vinyl sheets and mounted with an FFU (fan filter unit) on the ceiling. It has not been a easy job to install the conventional clean bench into the conveyor line because a fairly big modification is needed for the compartment so as to have a hole each on right and left sidewalls to let the conveyor pass through. TRINC has developed a new product “CONVEYOR CLEAN BENCH” to solve this problem. This equipment can be set up on the conveyor in the form of it straddling the conveyor without modifying the line currently used. Placing this equipment in the process that requires a clean environment on the conveyor solves dust-related problems as well.

Feature 1

Create a clean environment on the conveyor
Installation of this device into the process requiring a clean environment in the form straddling the conveyor protects the object from dust adhesion.

Feature 2

Super cleanliness
An ultra-clean environment of class 100 or less is realized.
Even if the outside environment is polluted, this device provides an important process with a super clean environment.

Feature 3

Instant launch
An ultra-clean environment of class 100 or less can be created in just one minute after switching on. It is not necessary to have a clean environment prepared beforehand because it can be created at any time.

Feature 4

Compact
Since it is compact and does not take up room, it can be installed into a narrow space at the side of the conveyor.

Feature 5

Easy installation
No installation work is required. No installation time is required. So, it can be installed without stopping the conveyor line.

Feature 6

Available for both machine processes and workers
Available for two types of processes
 (1) For processes where machining is done from the top of the conveyor
 (2) For processes where working by workers or robots is done beside the conveyor

Feature 7

Electric power saving
Reasonable airflow control makes the clean environment realized with a small fan, leading to a small power consumption.

Feature 8

Low cost
It is compact and low-cost model.

Feature 9

Does not pollute the factory
The conventional clean bench that exhausts to the outside of it the air including the dust generated inside. So the outside of it, that is the inside the factory, has been polluted. On the contrary, this device collects all the air it uses in itself, and never lets it go outside to pollute the outside environment.

Feature 10

Almost no filter maintenance required
Since this device adopts an inside air circulation system, it does not suck in the outside polluted air. So, the filter hardly gets dirty, and filter maintenance is not required except for a specific case.

Feature 11

Equipped with an ionizer
Since it comes with a powerful no-blow ionizer, there is no need to install any additional ionizers anew.

Feature 12

Door-less
It has no doors to keep the clean space airtight so the space is completely open. For this reason, the conveyor can be operated freely without worrying about the objects being obstructed or interfered with the doors.

総合お問合せ窓口

Phased Array Ionizing”, “No-Blow Ionizing”, “Ion Engine”, “Slight-Air Ionizing” are registered trademark (in Japan) of TRINC Corporation, a forerunner of this field.

Announcement
• Recruiting
• Demo Center Network
• New Product Information
• Event Information
• Media Information
• Promotion Videos
• Applications

 
Link
• TRINC Consulting
• TRINC Library
• TRINC METHOD
• Static Electricity / Dust Book
• Static Electricity Museum
• Story of Static Electricity

 
Contact us
• General Inquiry Counter
• Inquiry about product
• Price Inquiry
• Inquiries about distributors
• Online demonstration and disucussion
• Demo Center Visit Reseravation
• Anything Consultation


Support
• Products User Registration
• After-Sales Service

Related Brand
• LOHEN

SNS
• Facebook
• YouTube