Japanese | English | Sitemap
HOME > Product > Dedusting > Vacuum

Product Informatoin



Clean space construction Dust removal Static elimination Monitoring and control Medical-related or others
Continuous film / sheetPanel / Sheet-fed filmTray / JigWire / TubeParticular workpiece

Vacuum

Adhesive

Vacuum Cleaner

VACUUM TRINC Features Applications
TAS-480 VCB-F (FLEXIBLE BRUSH)
TAS-481 VCB-M (MEDIUM BRUSH)
TAS-482 VCB-H (HARD BRUSH)
•Sucking in static and dust
•Protection of dust re-adhesion
•Painting, Assembly
•Chemical, Pharmaceutical
•Cleanroom

Sucking in static and dust with ions produced.
The device does not contaminate surroundings.
VACUUM TRINC
(Flexible hair brush) TAS-480 VCB-F / (Medium hair brush) TAS-481 VCB-M / (Hard hair brush) TAS-482 VCB-H
An innovative device "VACUUM TRINC" that takes the place of ordinary ionizing guns or adhesive rollers
Remove "static" and "dust" with ions. No dust blown up, it doesn't contaminate surroundings.
Features Applications
  • ■Sucking in static and dust
  • ■Protection of dust re-adhesion
  • ■Painting factory
  • ■Assembling plant
  • ■Pharmaceutical factory
  • ■Clean room
  • ■Chemical factory
  • ■Food factory
TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.


Striking a new note. This is it. “A vacuum cleaner type ionizer/dust cleaner with a brush”

Because the static charged on the dust and foreign bodies is all eliminated with powerful ions, they are thoroughly removed. Further the messy crud adhering to the surface is brushed off together with dust. The surface can be finished up to not only dust-free but also static-free perfect condition after the use of VACUUM TRINC, and no dust would adhere again thereafter.

Feature 1

When used with vacuum system halted, this can be used as the "No-Blow TRINC (Ionizer)," a master card for anti-product defects measure.

Feature 2

When used with vacuum system halted, this can be used as the "No-Blow TRINC (Ionizer)," a master card for anti-product defects measure.

Feature 3

Replaceable brush available in three types to match with works (flexible, medium, hard hair brush)

Feature 4

Super long service life needle, replaceable

Feature 5

Brush assembly replaceable


VACUUM TRINC Features Applications
(BATTERY-OPERATED MODEL)
TAS-491 VC-BAT-M (MEDIUM BRUSH)
•Sucking in static and dust
•Protection of dust re-adhesion
•Battery operation
•Painting, Assembly
•Chemical, Pharmaceutical
•Cleanroom
Cordless vacuum cleaner type static-eliminator/dust-remover sets you free from troublesome AC power cords.
VACUUM TRINC Battery operated model (Medium hair)
TAS-491 VC-BAT
A cordless vacuum cleaner type static-ionizer/dust-remover sets you free from troublesome AC power cords.
Features Applications
  • ■Sucking in static and dust
  • ■Protection of dust re-adhesion
  • ■Battery operated
  • ■Painting factory
  • ■Assembling plant
  • ■Pharmaceutical factory
  • ■Clean room
  • ■Chemical factory
  • ■Food factory
TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.



Best suited to the static elimination and dust removal in wide area without dragging AC power cords in such manufacturing sites as CFRP aircraft parts, FRP hull or bath tab, and so on.

An innovative device "VACUUM TRINC" that takes the place of ordinary ionizing guns or adhesive rollers.
It remove "static" and "dust" with ions. No dust blown up, it doesn't contaminate surroundings.
Collect dust and foreign substances by removing the static charged on them by powerful ions.
A standard equipped brush is capable to remove even adhesive.
The object once swept out loses all static and does not allow for any dust to adhere again.

Stop using "Air-Blow Gun" that scatter around the dust around.
Stop using "adhesive roller or dust cloth" that generate static electricity and attract dust and particles.

Feature 1

A standard equipped brush capable to remove even adhesive

Feature 2

The object once swept out loses all static and does not allow for any dust to adhere again.

Feature 3

A cordless type operated by batteries

Feature 4

Small and light, mere 660g


NEW

VACUUM TRINC PEN Features Applications
TAS-492 VC-PEN-F (FLEXIBLE BRUSH)
TAS-493 VC-PEN-M (MEDIUM BRUSH)
TAS-1239 VC-PEN-FF (ULTRA FLEXIBLE BRUSH)
•Sucking in static and dust
•Suitable for cleaning of the inside bottle
•Slender body
•Painting, Assembly
•Chemical, Pharmaceutical
•Cleanroom

Pen-type static eliminator and dust collector
ideal for work in narrow areas.
VACUUM TRINC PEN
(Flexible hair brush) TAS-492 VC-PEN-F
  (Medium hair brush) TAS-493 VC-PEN-M
    (Ultra flexible hair brush) TAS-1239 VC-PEN-FF


The pen type static-ionizer/dust-remover best suited to the removal of static and dust at the narrow inside of container.
Features Applications
  • ■Sucking in static and dust
  • ■Cleaning of the inside of bottle
  • ■Slender style
  • ■Painting factory
  • ■Assembling plant
  • ■Pharmaceutical factory
  • ■Clean room
  • ■Chemical factory
  • ■Food factory
TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.



Best suited to the removal of foreign substances at the narrow inside of container


Feature 1

Collect dust and foreign substances by removing the static charged on them

Feature 2

Best suited to the removal of foreign substances at the narrow inside of container

Feature 3

A standard equipped brush capable to remove even adhesive

Feature 4

The object once swept out loses all static and does not allow for any dust to adhere again

Feature 5

Brushing without blowing off air assures no dust scattered around


NEW

METAL MOLD CLEANER Features Applications
TAS-1332 MMC-HT160-DC (w/ dust collector)
TAS-1333 MMC-HT160 (w/o dust collector)
•High dust-removal performance
•Built in static eliminator
•Heat resistant body
•Metal mold cleaning
Cleaning dust off the metal mold makes everybody relieved from dust problems.
METAL MOLD CLEANER
(WITH DUST COLLECTOR) TAS-1332 MMC-HT160-DC
(Cleaning head) TAS-1333 MMC-HT160

Cleaning dust off the metal mold makes everybody relieved from dust problem.
Features Applications
  • ■High dust removal rate
  • ■Equipped with an ionizer
  • ■Do not disturb temperature control
  • ■Heat resistant head
  • ■Removal of adhesive foreign bodies is also possible
  • ■Robotization is also possible
  • ■Compact and light weight
  • ■Maintenance for the metal molds molding
TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.



World first. Cleaning dust off the metal mold makes everybody relived from dust problems.


Feature 1

High dust removal rate
The unique structure ensures high dust removal rate with less air consumption, and significantly reduces dust remaining in the mold.

Feature 2

Equipped with an ionizer
Since the dust attaching to the metal molds is charged with static, removing it by blowing or vacuuming is so hard. This device is e quipped with an ionizer which pours ions over the dust to neutralize the static so that it can be vacuumed with ease.

Feature 3

Do not disturb temperature control
The occurrence of molding defects was suppressed without lowering the temperature of the metal mold by vacuum suction instead of air blow.

Feature 4

Heat resistant head
The dust collection head withstands high temperatures of 160°C.

Feature 5

Removal of adhesive foreign bodies is also possible
Even sticky foreign bodies can be scraped off with a brush.

Feature 6

Robotization is also possible
It is a lso possible to have a r obot holding it for cleaning for automatization

Feature 7

Compact and light weight
Compact and light weight for operation at narrow mold openings.

Feature 8

Low power operation
Since a high dust removal rate is achieved with a small amount of air, the compact dust collector operates with small power.


総合お問合せ窓口

Phased Array Ionizing”, “No-Blow Ionizing”, “Ion Engine”, “Slight-Air Ionizing” are registered trademark (in Japan) of TRINC Corporation, a forerunner of this field.

Announcement
• Recruiting
• Demo Center Network
• New Product Information
• Event Information
• Media Information
• Promotion Videos
• Applications

 
Link
• TRINC Consulting
• TRINC Library
• TRINC METHOD
• Static Electricity / Dust Book
• Static Electricity Museum
• Story of Static Electricity

 
Contact us
• General Inquiry Counter
• Inquiry about product
• Price Inquiry
• Inquiries about distributors
• Online demonstration and disucussion
• Demo Center Visit Reseravation
• Anything Consultation


Support
• Products User Registration
• After-Sales Service

Related Brand
• LOHEN

SNS
• Facebook
• YouTube