PRODUCTS
HEAT-RESISTANT BAR TRINC（HIGH TEMP.200℃）
XXXX=0250/0390/0530/0950/1230/1510
High heat-resistant Bar TRINC eliminates static electricity from
high temperature workpieces like inside the drying furnace.
Heat-resistant construction
Super low power consumption
Feature details
Stainless steel made ion bars
The ion bars located close to work pieces for ion emission over them is made of stainless steel. Re-examining materials used for the needle holders and wiring and their structures, the ion bar is made assured of its heat resistance up to 200℃. The air-free ionizing does not require the build-in fan which lacks a heat-resistance, and contributes largely to assuring the heat -resistance as well.
Remotely controlled high voltage generating unit
The high voltage generating unit is isolated from the ion-bar. Placing the ion bar close to the work pieces which requires to be ionized and having the high voltage generating unit close at operator's hand, the system can be operated with the ion-bar alone put into the inaccessible place. The main control unit, commonly used for a bar type ionizer (Bar TRINC) and a phased array ionizer (TRINC PHASED ARRAY IONIZER), has a function synchronizing the polarity of neighboring ionizers with an excellent extensibility.
“Bo-blow ionizing
This is a TRINC's unique system that diffuses ions by means of Coulomb’s repulsion. The ion-diffusion system used in ordinary ionizers emits ions towards work pieces on the air from a build-in fan or a compressor. But this air blow incurs unevenness and cooling down of temperature on the injection molding dies or high-temperature drying furnace to create a new problem. The air-free ionizing makes it possible to eliminate static without worrying about the temperature change.
- Eliminates static electricity from high-temperature objects such as drying ovens without airflow
- Adoption of materials and structure with excellent heat resistance
- Heat-resistant ionizer realized by TRINC's technical capabilities
The high voltage generating unit is isolated from the ion-bar. Placing the ion bar close to the work pieces which requires to be ionized and having the high voltage generating unit close at operator's hand, AS-306 BA-HT200 can be operated with the ion-bar alone put into the inaccessible place.
HIGH HEAT-RESISTANT BAR TRINC Effective ionizing area (without air blow)
| Bar size | 250 | 390 | 530 | 950 | 1230 | 1510 |
| Length(mm) | 330 | 470 | 610 | 1030 | 1310 | 1590 |
| Depth(mm) | 1000 | |||||
| Ionizing performance | Approx. 1.0 second (measured at center, 100mm off, using charge plate monitor set at 20pF without air blow) | |||||
Product number (model number/format)
0390
0530
0950
1230
1510
