|
Static and Dust Fundamentals - 29 (Table of contents) |
Until the last number, we had covered 2 Problems caused by the static, 3 Fundamentals of the static, 4 Fundamentals of dust, 5 Fundamentals of antistatic and anti-dust measures, and 6 Antistatic and anti-dust measures of new age. In this number we continue to discuss 7 Anti-static/dust measures with full of errors, which was covered partially in the last number.
7.Antistatic and anti-dust measures with full of errors
7-2 Static elimination on “Webs” and “Panels”
7-2-1. An age of the web and panel seen in every direction as man turns
his eyes.
7-2-2. Dust rampages!
(1) Lot rejection ---- $625,000 worth loss
(2) Static electricity as a main causal factor
(3) Troubles on the doors
7-2-3. What’s wrong? ---- The antistatic measures applied are wrong
(1) As a general speaking---
(2) Liquid crystal panel
(3) Dust removing method
7-2-4. Static is hard to understand
(1) Static hiding phenomenon
(2) Static emerging phenomenon
7-2-5. Static on objects cannot be eliminated if anything else stays
behind them.
(1) Conductive materials
(2) Nonconductive materials
(3) Conductive materials covered with nonconductive materials
7-2-6. Why isn’t it effective?
(1) Conductive materials
(2) Nonconductive materials
(3) Conductive materials covered with nonconductive materials
7-2-7. Anti-static/dust measures with full of errors
(1) Unrealized errors on printing machines
(2) Unrealized errors on WEB Cleaner
7-2-8. What should we do then?
(1) What are customers asked for?
(2) What are makers asked for?
Above, we covered “Static elimination on Webs and Panels” as a second issue of the “Anti-static/dust measures with full of errors.”
|