PHASED ARRAY SMART IONIZER
TAS-810 SMT-SFS

No-Blow Ionization. High Accuracy Ionization.
Totally zero static circumstances including workers.
Drastically reduced dust attachment.

Features		Applications
■High accuracy static elimination ■Dust-attraction prevention ■Wrist strap is not needed ■No ion-shade made ■No-Blow ionizing ■Wide area static ionizing		■Semiconductors field ■Electric-appliance field ■Plastics field ■Food processing ■Pharmaceutical field ■Cosmetics field ■Printings field

TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.

We at TRINC have once kept our eyes on the fundamental question, "why does dust adhere to workpieces?" and elaborated the analysis of its mechanism. It revealed that the floating dust charged with static was attracted to adhere to them. In other words, if we dissipate the static charge on it by ionizing the whole space including it without blow (Static-Free Space Ionizing by No-Blow TRINC), we can avoid dust adherence. Since blowing raises and sprays dust over workpieces, it has to be avoided. From this thought, a TRINC'S unique product, PHASED ARRAY SMART IONIZER, has born.

PAHSED ARRAY IONIZER Effective ionizing area

Width (mm)	1600
Depth (mm)	900
Height (mm)	500
Decay time	Approx. 5 seconds (measured at center, 600mm off, with a charge plate monitor set at 20pF without air)

▲Close information  Catalog request   CAD data request   Inquiry  

SMARTRINC (STAND-ALONE MODEL / WALL-HANGING MODEL)
TAS-812 SMT / TAS-813 SMTW

TRINC has developed a new category of static eliminator, “PHASED ARRAY Desktop.” A new type static eliminator “SMARTRINC” makes an appearance on a static eliminator world, fusing “PHASED ARRAY TRINC” and “No-Blow DESKTOP TRINC” together.

Features		Applications
■No ion-balance pulsation ■Feedback system ■No-Blow ionizing ■Super low power consumption		■Semiconductors ■Electricity ■Plastic ■Food ■Pharmaceutical ■Cosmetic ■Printing

TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.

Literally it’s indeed a very smart static ionizer. An ultimate solution to the anti-static steps required for the desktop ionizer in the splendor of unrivaled function and performance. Compact though it is, wide space ionization becomes possible. Spacious in the image though it is, the compact size makes it not space-consuming but user friendly. Of course, it is equipped with the TRINC’s unique “Air-Free TRINC” system, which eliminates the static charged on products on the desk without assistance of aid blow as well as neutralizes the static charged on floating dust in the air. Unlike fan-type static ionizers, it does not raise the dust piled up on the desk, which has been recognized as a demerit on them, and displays its striking effect on the countermeasures against dust/debris-related problems. At the same time, the static charged on workers is effectively dissipated, so no static remains on both products and workers. As a result, the use of conventional antistatic measures like the wrist strap becomes no longer necessary.

▲Close information  Catalog request   CAD data request   Inquiry  

ION LENS TRINC
TAS-382 LENS

It's a must in the process of peeling protective films away.
Problems of a static buildup at peeling films away and consequent dust adhesion are all resolved.

Features		Applications
■Instant ionizing ■No-Blow ionizing ■High ion balance ■Wide range of vision		■At the time of peeling protective films away from liquid crystals ■At the time of peeling protective films away from printed circuit boards

TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.

▲Close information  Catalog request   CAD data request   Inquiry  

ION BALANCER-CC
TAS-184 ION BALANCER CC

A newborn clean "No-wind TRINC".
Effective in the yield rate up and cost cutting

Features		Applications
■High ion-balance: ±5V or lower ■Feedback system ■No-Blow ionizing ■Capable of air blow ■Super low power consumption		■Electronics industry field

TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.

ION BALANCER-ER
TAS-187 ION BALANCER ER

Birth of a static ionizer usable under poor working conditions.
It removes static electricity precisely even under environment of dust, oil mist, medicaments, and soot floating about.
         (Not explosion-proof construction)

Features		Applications
■Usable even under extremely poor conditions ■Ion-balancer with a high sensibility ■High-precise feedback control ■High reliable static removal system		■As a countermeasure for ESD under poor environment ■LED production processing ■Anti-static countermeasure at the circuit-board processing

TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.

ION BALANCER NWM
TAS-182 ION BALANCER NWM

No-Blow TRINC
It is a micro-mini high accuracy model that can be built into the equipment.

Features		Applications
■High ion-balance: ±30V or lower ■Feedback system ■No-Blow ionizing ■Micro-mini size ■Super low power consumption		■Installation into semiconductor manufacturing equipment ■Other multi-purpose use

TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.

ION BALANCER-C
TAS-182 ION BALANCER C

Production-yield improvement with No-Blow ionization

Features		Applications
■High ion-balance: ±5V or lower ■Feedback system ■No-Blow ionizing ■Capable of air blow ■Super low power consumption		■Electronics industry field ■Plastic field ■Other multi-purpose use

TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.