Static eliminator for particular application | Anti–static / dust measures

▼For more information Catalog request CAD data request Inquiry

PELLETRINC(Vacuum transport)
TAS-286 PEL

A perfect solution to static problems of pellets inside the injection molding machines.

Features		Applications
■Prevention of pellets from attaching to the hopper inner wall ■Prevention of an error of empty-hopper-detector ■Prevention of color shading on resin moldings ■Prevention of an electric shock resulting from an inadvertent touch to the pellet suction hoses ■Air and additional setting work are not required ■Wide selective installation into various sized hoses		■Resin molding factory

(Precautions)Do not use for the following materials (powder). These materials (powder) can cause electric leakage, resulting in electric shock, fire, or explosion.
1) Those containing moisture or humidity
2) Those containing flammable or explosive ingredients
3) Those containing salt
4) Conductive
This equipment is a successor to TAS-285 PEL (PELLETRINC)

Feature 1

Prevention of pellets from attaching to the hopper inner wall of molding machines: The pellets attaching to the inside of the hopper stubbornly by static are hardly removed. Which has long been a factor for the pellet exchange process to take so long time that a molding machine's operation rate is badly reduced. With this device applied, not only can the hopper cleaning time before the pellet exchange be reduced drastically, but the tryout required at the time of every pellet exchange can also be reduced so much as to cut down drastically the time and raw pellet materials. So the set-up time, man-hour, and material are totally saved drastically.

Feature 2

Prevention of an empty-hopper-detector from being set off unexpectedly: Even a few pieces of pellets attaching to the hopper inner wall may stop an empty-hopper-detector from working despite being empty and prevent the pellets from being supplied properly. With this device applied, such false detection can be eliminated and a great operation loss which might have otherwise been caused by machine stop during particularly night time can be avoided.

Feature 3

revention of color shading on resin moldings: Pellets and master batches are not equally charged with static, so their attaching to the hopper inner wall differs from each other. This device dissipates the static charged on everything inside the hopper and prevents them from attaching to as well as falling off from the wall during operation thereby to efficiently avoid color shading problem.

Feature 4

Prevention of an electric shock resulting from an inadvertent touch to the pellet suction hoses: Generally, when pellets or recycled materials are sucked out and transferred to the hopper through the suction hose, a lot of static is built up inside of it. The static is so high a voltage as to pierce (discharge to leak) through the hose wall. An operator who carelessly touches it could receive an intense shock instantaneously. This device dissipates the static built up massively on the pellets in transition and on the hose to prevent a intense shock for safe operation.

Feature 5

Air is not required to send out ions: Conventional antistatic devices require outside air supply. Since this device eliminates the need of air, the pneumatic conveying capacity needed originally to transfer pellets is not interfered for more efficient operation.

Feature 6

Additional setting works is not required.: Thanks to the configuration of the main body being set into the middle of the hose, no additional hooks or holders are required. It provides simple installations and retrofitting to the existing machinery.

Feature 7

Wide selective installation into various sized hoses: This device responds to the installation into various hoses sized 25mm, 38mm, 50mm, 100mm in diameter.

Feature 8

Easy maintenance: Detaching the main body from hoses is so simple that any residual pellets inside can be blown off easily. And the TRINC's "Leak-Free Ionizing" technology incorporated realizes the no-leak structure which necessitates almost no maintenance on the ion generating area.

Feature 9

Low electric savings: RINC's specialty is ultra-power saving technology, which achieves ultra-low power consumption of only 3W. Also, since it does not use air blow, the large power consumption of the compressor can be reduced to zero.

▲Close information Catalog request CAD data request Inquiry

▼For more information Catalog request CAD data request Inquiry

STATIC MARK TRINC
TAS-1449_STM

For prevention of fogging of molded products.
Prevents fogging of lenses and covers.

Features		Applications
■High static mark prevention effect ■Air compressor not required ■Easy installation ■Small size ■Power Saving ■No daily maintenance requi		■Resin molding factory

Use the unit in a vertical position. Never use it in a lying po sition.In addition, this unit is not dustproof and explosion-pr oof.
TRINC's discharge needle has a long life, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.

Feature 1

High static mark prevention effect: Prevents fogging and stains on the transparent covers of car he adlights and plastic lenses of glasses.

Feature 2

Air compressor not required: Since no air is used, there is no need for a compressor.This contributes to the decarbonization of factories.

Feature 3

Easy installation: It can be easily installed by simply tucking it into the middle of the pellet supply hose.Since it does not involve any construction work, you can instal l it yourself and use it right away.

Feature 4

Small size: Small and space-saving. Diameter 130mm x 231mmL

Feature 5

Power Saving: It operates with a low power consumption of only 2.8W, enabling low-cost operation.

Feature 6

No daily maintenance required: Cleaning only once a year provides a high level of continuous p reventive effect.

▲Close information Catalog request CAD data request Inquiry

▼For more information Catalog request CAD data request Inquiry

MOLD TRINC
TAS-307/308/309/310 MOLD

The ionizer dedicated to injection molding clears up the static and dust-related troubles once for all

Features		Applications
■No-Blow ionizing ■Heat-resistant ■Super low power consumption		■Resin molding factory

TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.

A long-awaited ionizer specialized for resin molding

MOLD TRINC prevents dust and the flakes stripped off the gate and the runner from adhering to dies and molded articles, and backs customers up strongly in their effort to reduce the defects fraction on resin molding for higher work efficiency. This is the good news for those who have had no countermeasures against static even though they know it is the cause for problems.

Feature 1

Foreign materials-related defective fraction can be cut back.: Product defects are cutback by preventing dust from adhering to molded articles and also preventing gate flakes and burrs from being casted in

Feature 2

Prevention of molding dies from fracturing: An accident of the molded articles being pinched between dies is prevented by ensuring the safe extraction of them out of dies after molding, which serves as a prevention against die fracturing

Feature 3

Unattended operation and cost cutback become possible: The prevention of the molding dies being fractured makes the product delivering time shorter.

Feature 4

No-Blow TRINC solves die-cooling-off and dust rising problems.: The conventional ionizers which sends out ions using air make the product quality unstable due to a partial temperature change in the dies and the dust raised by air. MOLD TRINC is the No-Blow TRINC ionizer

Feature 5

Magnet-mounting eases frequent dies-exchanging work.: MOLD TRINC uses magnet-mounting to fix the light-weight ion-bars, while conventional ionizers are fixed on the dies using bolts and screws. Mounting and dismounting the ion-bars can be done with one-touch motion to reduce the troublesome work done at the dies exchange, repairs and touching-up.

Feature 6

Ions are emanated without assistance of air just before the dies are opened.: The energy-saving system employed controls ions to emanate only at the time of dies penning. With the ionizer operating period shortened, both the maintenance work and ozone generation are reduced. This is really an environment-conscious model.

▲Close information Catalog request CAD data request Inquiry

▼For more information Catalog request CAD data request Inquiry

ROUTER TRINC
TAS-153 ROUTER

Prevention of the cutoffs of router or modeling machine from adhering

Features		Applications
■High concentrated ions ■Prevent cutoffs adhering		■Modeling machine ■Router machine

Feature 1

Highly concentrated ions: Highly concentrated ions eliminate instantly the static charged on the works and the flying cutoffs.

Feature 2

Adhesion of cutoffs to works, jigs and covers of machines is reduced to a large extent.

Feature 3

Prevent cutoffs adhering and easy to remove.: With the cutoffs stopped adhering, their removing and collecting becomes so easy that the dust collector is not required anymore.

Feature 4

Prevent scatches on the surface by cutoff: The substantial reduction of cutoff’s adhering to works prevents scratches on their surfaces and resultant products flaws.

Feature 5

Prevent the machining accuracy from deteriorating by cutoff.: The reduction of cutoffs caught between the blade edge and the work prevents the machining accuracy from deteriorating.

▲Close information Catalog request CAD data request Inquiry

▼For more information Catalog request CAD data request Inquiry

POWDER TRANSPORTING TRINC
TAS-141 POWDER

A complete improvement on static problems in powder transportation

Features		Applications
■Prevention of powder from gathering to lump ■Prevention of a carrying capacity of the hose and hopper from getting low ■Prevention of powder from adhering to the inner wall of the hose and hopper ■Prevention of the part-feeding by the hose and hopper from being restricted ■Prevention of an electric shock on the material-feeding hose		■Production process for food, pharmaceutical and chemical powder products

(Precautions)
This equipment is not an approved explosion-proof product. Do not use for the following materials (powder). These materials (powder) can cause electric leakage, resulting in electric shock, fire, or explosion.
1) Those containing moisture or humidity
2) Those containing flammable or explosive ingredients
3) Those containing salt
4) Conductive

A considerable amount of static is generated and charged on the fine particles (powder) during their transportation or handling at the worksite. For example, it causes various problems such as the following

1) Part of powder gathers to lump.
2) They tend to adhere to the inner wall of the hoppers, and as a result;
・ The part feeding motion is restrained.
・ Powder material change takes time and a large material loss would result.
3) They adhere to the hose inner wall as well.
・ The hose would be eventually clogged up to stop the powder being forwarded.
4) Clogging.
5) Dust explosion would take place.
6) Operators could receive an electric shock.

To cope with it, Trinc has developed a technology to solve this challenge and marketed as a product named, POWDER TRANSPORTING TRINC.

Feature 1

Prevention of powder from gathering to lump: Powder gets to gather to lump when charged with static. This apparatus neutralizes the static charged on it and prevent it from gathering.

Feature 2

Prevention of a carrying capacity of the hose and hopper from g etting low: Adhering of powder to the hose or the hopper makes its carrying capacity lower or a total processing capacity lower than their original capacity. This apparatus neutralizes the static charged on powder and reduce problems.

Feature 3

Prevention of powder from adhering to the inner wall of the hos e and hopper: The powder material clinging to the hose or hopper is not so easy to remove since it is attracted firmly with static, which has been a factor of both the material change being time-consuming work and machining efficiency being reduced. This apparatus improves the problem of their clinging and reduces the time required for the material-change work drastically.

Feature 4

Prevention of the part-feeding by the hose and hopper from being restricted: The powder material charged with static clings to the hose and hopper and hinders the material from feeding. The use of this apparatus contributes to stop a large operation loss by avoiding the part-feeding risk even in an unattended automatic operation.

Feature 5

Prevention of an electric shock on the material-feeding hose: When transporting the powder from the hopper by the hose, the hose is charged with a large amount of static. The charge is so high a voltage that it leaks through the hose wall to discharge outside and get the operator who touches it to receive an electric shock. With this apparatus applied the static is eliminated for the safe operation.

Feature 6

Retain the Performance of ionization: The conventional systems used in the same industry a problem of their needles attached with powder material and reduce the ionizing performance. This apparatus using the blower unit to supply air to the system prevents material from attaching to the needles as well as helps discharge ions for powerful static elimination on the material

Feature 7

Construction work is not required: Because the system is designed to have the main processing part inserted in the hose line, there are no other components required to install it. It is also possible to retrofit it to the existing equipment.

Feature 8

Wide selective installation into various sized hoses: This apparatus is applicable to the hoses sized 38mm, 50mm, and 100mm in diameter.

Feature 9

Easy maintenance: Detaching the main system from the hose is so simple that residual material inside is blown off easily. The “Leak-Free TRINC’ technology adopted in the system realizes the no-leak structure which necessitates almost no maintenance in the ion generating area.

▲Close information Catalog request CAD data request Inquiry

▼For more information Catalog request CAD data request Inquiry

PRINTER ENVIRONMENT TRINC
TAS-1262 PRTEV

Elimination of printing failures on printers.
It’s an instrument that neutralizes static to create an environment of them.

Features		Applications
■No-Blow ionizing ■Leak-Free ionizing ■Direct mode / Environment mode ■Portable with casters ■One-touch maintenance ■Low power consumption ■Ideal for large inkjet printers		■Inkjet printer ■Printing machine

TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.


Installation image of PRINTER ENVIRONMENT TRINC	PRINTER ENVIRONMENT TRINC

Static-related troubles on printers has not been absolutely improved.
If specific user's voices are given;
1) Traditionally, a printer (printing machine) is equipped with a ionizer, but there is no effect.
2) Since the printers they use show no difference whether the ionizers equipped originally on them are turned on or turned off, they shut off them all.
3) The ionizer equipped on the printer does not work since it is covered with gooey ink.
4) The ionizing strap is more useful than the ionizer.
5) An ionizer became the fire to break out a fire.
Like the cases listed above, there are many static-related problems about the printers (printing machines). Although they say that they somehow work out the problems to continue the operation, the time has changed and the mechanism of printing has also changed, so it has become more difficult to cope with conventional antistatic measures. That is popularization of the inkjet system. In the inkjet system, fine ink droplets fly through the air. Since static charged on ink droplets and one on the printing paper attracts / repels, the ink droplets do not fly as intended, making it gets to be difficult to achieve high definition printing. Unless you would create the static environment, you could not make use of the rare chance of the high function. In addition to some TRINC ionizers (static eliminators) that have already been effective at printing sites, TRINC has developed "PRINTER ENVIRONMENT TRINC" this time for emergency antistatic measures.

Feature 1

Direct mode (Switching over with mode switch): The static charged on printing papers attached to the printer and those already printed is removed strongly with the ions emitted at point-blank distance (within 300 mm range) without air-assistance. It is a key point of use to locate this instrument as close to the object as possible.

Feature 2

Environment mode(Switching over with mode switch): In this mode, it is used for preprocessing (setting up) material ls (sheets, plastic bags, etc.) used during printing and before printing. Immerse the object in the windless space filled with ions so that the static existing in the space is neutralized to prevent malfunction or painting failures caused by static. Since the effective range of ions is wide, adverse effects of static electricity can be avoided if it is installed within 1,500 mm from the object.

Feature 3

No-blow ionizing: Because it emits ions to have them flying in the air of the work site without air-assistance , it does neither raise dust nor let the dust adhere to the printing papers or other objects.

Feature 4

Portable with casters: The instrument with casters enables you to find out the optimum location, as required, and emit ions from there to eliminate static electricity.

Feature 5

A leak-free structure assures you of the operation free from troubles.: The basic structure that doesn’t use air will never cause a leakage and provides you with the operation free from breakdown.

Feature 6

One touch maintenance: Because of the one touch cleaner equipped, dirt of the discharg needle is completed with one touch.

Feature 7

Low power consumption: It consumes power as low as 3W.

▲Close information Catalog request CAD data request Inquiry

▼For more information Catalog request CAD data request Inquiry

SHEET/PAPER FEEDER TRINC
TAS-282 SPF

It finally solves the incurable problems that printing machines have suffered from, such as “feeding troubles on the sheet feeder,” “uneven hem of pile-up papers,” and so on ---

Features		Applications
■Powerful ionizing ■Corresponding pile-up planate sheets		■Printing machine ■Food wrapping machine ■Medical products packaging ■Film feeder ■Sheet feeder ■Paper feeder

TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended

Feature 1

High density ions dissipate static electricity instantly and powerfully.

Feature 2

The Leak-free TRINC incorporated into the system makes it highly reliable with no risk of an electric leak and stable for effective long-term operation.

Feature 3

A thin body makes it possible to be inserted into a narrow gap of machinery, like a gap made between the paper feeding tray and the body.

Feature 4

When multiple sets of this device are located around the pile-up papers to be fed in, even the fierce static charged on the papers is dissipated powerfully.

▲Close information Catalog request CAD data request Inquiry

▼For more information Catalog request CAD data request Inquiry

PRINTER TRINC
TAS-350 PRINTER

An ionizer to improve the printing quality of inkjet printers has come on stage.

Features		Applications
■Ultra small size and light weight ■Ultra low-cost ■No-Blow TRINC adopted ■High precision static elimination ■High speed static elimination ■Abnormality monitoring function installed ■Safety design ■Ultra low power consumption ■Ideal for large inkjet printers		■Inkjet printer ■Laser printer ■Chemical factory ■Complex machine

Conventional printers are mainly of a laser printer type using a laser, which uses a photosensitive drum to transfer the latent image onto paper, so that deterioration of the print quality due to electrostatic discharge has not been a major problem. Nowadays, as the mainstream of the printer turns into an inkjet printer type, the problem that static on the paper causes the droplet trajectory of the ultra-small ink droplet to go out of order and deteriorates the print quality has come under scrutiny. Therefor the necessity of eliminating the static charged on the paper with high precision has arisen. Since the antistatic brush that has been used conventionally as a countermeasure of this problem cannot eliminate static properly, another problem that residual static deteriorates the print quality has come up. In addition, there has been a problem of papers getting jammed and not aligned to one side due to the adsorption by static. Even with many problems like this, the printers are designed in a space-saving mechanism so tightly as to have no space to put the conventional ionizers into the chassis. This has made it difficult to take countermeasures. This time, to solve these problems, TRINC has developed a "PRINTER TRINC” that is capable to eliminate static in high precision and high-speed manner in spite of the ultra-thin and compact size built in low cost.

Feature 1

Ultra small size and light weight: Since the ion head is ultra-thin, it can be installed into a small space inside the printer.

Feature 2

Ultra low-cost: The design of the ionizer’s main body and ion head has been tot ally re-examined so as to be able to have them incorporated into the low-priced general-purpose printers as well as to realize super low price.

Feature 3

No-Blow TRINC adopted: PRINTER TRINC neutralizes static without air and has no such a fatal defect as seen on the conventional ionizers that air blow causes the ink-droplet trajectory to go out of order and paper dust to raise to mess printed matters.

Feature 4

High precision static elimination: The static elimination brush used conventionally ionizes papers incompletely to the extent that the residual voltage still remains at 3kV. This apparatus adopts the TRINC’s unique ion engine system which enables to ionize with high precision.

Feature 5

High speed static elimination: Due to high ion concentration, static elimination of paper that runs at high speed is also possible.

Feature 6

Abnormality monitoring function installed: "Abnormality monitoring function" to prevent troubles such as abnormal discharge is installed. Since an error indicates an error LED display and an error signal externally, it is also possible to collectively monitor the operation status of the ionizer together with the printer body by linking with the printer itself.

Feature 7

Safety design: Generally, the printer operates in an adverse environment where ink solvents and paper dust float, so the high voltage of the installed ionizer was afraid to leak easily. The safety design incorporated prevents electric leakage and ensures safety.

Feature 8

Ultra low power consumption: It operates with a power consumption of only 1W, achieving super energy saving of 1/5 to 1/10 compared to conventional ionizers.

Feature 9

Ideal for large inkjet printers: Ideal for large size inkjet printers for high-definition printing.

▲Close information Catalog request CAD data request Inquiry

▼For more information Catalog request CAD data request Inquiry

PARTS FEEDER TRINC
TAS-124 PFA / TAS-125 PFI

Concerns and problems over part feeders are solved thoroughly.

Features		Applications
■Outstanding static-elimination effect ■Outstanding cleaning effect ■Compact size ■A longer service life and higher reliability ■Easy maintenance ■Low power consumption		■Parts Feeder

TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended

The electrostatic problems on parts feeders have been left unsolved for many years. Since the static charged between the bowl and parts cannot be removed whatever ionizers people may use, the phenomenon of "part supply stall" due to it has been regarded as an eternally unsolved problem. TRINC has come face to face with this problem and finally solved it after having devoted all our energy for 10years.

Here is a promotion video of PARTS FEEDER TRINC

Feature 1

Outstanding static-elimination effect: The static between the bowl and parts is all removed, and the "part supply function" is restored to the original state.

Feature 2

Outstanding cleaning effect: Blowing off dust as the device dissipates the static charged on each single work sedulously ensures the cleaning of the dust adhering to the works finely.

Feature 3

Compact size: Compact-sized body makes it possible to install into the parts feeders specialized for micro components.

Feature 4

Free attachment is possible: Attachment of this device to parts feeders can be made freely from its angle and position for the optimum operation.

Feature 5

Various sizes available: The device is applicable from the micro to large sized parts feeders.

Feature 6

A longer service life and higher reliability: Thanks to TRINC's "Leak-Free Ionizing," a higher reliability of being free from troubles is realized.

Feature 7

Easy maintenance: TRINC's "Leak-Free Ionizing" makes the system structure easy to work on for easier maintenance.

Feature 8

Low power consumption: With a TRINC's super-power saving technology, a super-low power consumption of a mere 3W is realized.dd>

Feature 9

Only a small amount of air used: The system operates with air pressure as low as 0.03MPa, which saves amount of air used to 3ltr per min.

Feature 10

A stand (optionally available): A stand is prepared as an optional part, which doesn't necessitate installation work and enables to start the operation instantly.

Feature 11

Dust collecting hood (optional accessory): The dust adhering to parts or fell off from them by vibration are sucked forcibly into the dust catcher to prevent it from being scattered around.

▲Close information Catalog request CAD data request Inquiry

▼For more information Catalog request CAD data request Inquiry

DUST PROTECTOR
TAS-13 DPT/TAS-14 DPT-S

For dust protection of the photo sensor.
Prevention of malfunction due to dust adhesion.

Features		Applications
■Dust prevention device for the photo sensor ■Small and Light ■No-blow operation ■Ultra-low power consumption		■Dust prevention and static elimination of photo sensor

TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.

Automation and robotization are rapidly advancing in factories and distribution centers.
In that case there may happen the problem of malfunction caused by dust adhering to the photo sensor.
Especially in distribution centers, since corrugated cardboards covered with dust are transported and sorted,
the problem of malfunction due to dust adhesion is serious. And once malfunction happens,
the valuable shipper's items will be destroyed or lost.
Each package holds important data such as ID, delivery source (shipper), delivery destination, etc.,
and these are printed by barcode or QR code. If the sensor misreads this information, the site will be in turmoil.
That is why "It is just dust, but it becomes a big issue”.

TRINC focused on this problem from the demand of the market and has solved it with TRINC's unique technology.
For the industrial fields of AI, FA, and robotization, which will accelerate further in the future, all processes are done through sensors.
So if the original signal is out of order, all systems will be in the terrible mess.
TRINC releases the world's first "dust protector" that protects the light receiving part from dust
by installing it near the photo sensor, which is the key to the automation.

Feature 1

The world's first device for prevention of dust adhesion that protects the photo sensor from dust.: By placing this device near the light receiving part of the photo sensor that reads the optical signal,
it is possible to prevent the adhesion of airborne particles.

Feature 2

High dust removing efficiency: Effective to reduce the dust adhesion rate by 97.2% (actual measured value)

Feature 3

It also eliminates static electricity.: Equipped with a no-blow static eliminator, it can remove static electricity from not only the photo sensor but also the surrounding space.

Feature 4

No-blow operation: Since it does not use air-blow, it does not blow up the dust around and re-adhere it to the object.

Feature 5

Large clean space: The maximum effective range for dust adhesion prevention created by this unit is as wide as 1000mm(W) x 200 to 700 mm(D), so it can be used for the large photo sensor.

Feature 6

Easy installation: Not only you can stand it near the target photo sensor, you can also install it on the neighboring structure. In case of stand-alone model, installation work is not necessary.

Feature 7

Small size: Space saving due to small size

Feature 8

Power saving: Low power consumption of only 0.85W.

Feature 9

Low-cost: Compact and cost saving.

Feature 10

Easy maintenance: It can be used cleanly and safely by cleaning it about once a year.

▲Close information Catalog request CAD data request Inquiry

▼For more information Catalog request CAD data request Inquiry

BODY SHOP TRINC
TAS-360 BODYSHOP

Anti-static and anti-dust measures for automobile repair shop

Features		Applications
■Powerful ionization ■Super low power consumption ■Wide area static ionizing ■One-touch cleaner		■Automobile repair shop

TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.

It’s a mind-set of carving up the space with ions.
An innovative apparatus fitting perfectly the needs for the body shops and sheet metal/paint plants, where they have difficulty in acquiring a dedicated space for painting, has come on stage. It cuts out the static charged on the painting area with powerful ions and prevents dust from adhering to the area so as to assure a beautiful finishing even without a dedicated painting space. An ideal painting environment created by this apparatus prevents not only the dust adhesion but also flake aligning to skip the step of “shading-relief” work.

Feature 1

The same quality as the clean room is assured.: The static charged on the body touch-up area and the dust floating nearby is wholly eliminated at the preparation process before painting, so that dust adherence to the car body is totally avoided. Because the same cleanliness as that in the clean room is gained, there is a difference in the paint finish than other apparatuses.

Feature 2

Metal flakes are aligned by the ion effect.: The static charged on the touch-up surface raises metal flakes to form speckles. BODY SHOP TRINC creates a “room-less clean room” with ions and aligns flakes to promise a wonderful painting finish.

Feature 3

Because of high finish effect, shading work is not required.: Conventionally, a boundary line between the touch-up and original paints has been treated with a shading dedicated thinner. The use of BODY SHOP TRINC skips the step of this shading work.

Feature 4

Health impairment is prevented.: At the body shop, they have used the antistatic spray to eliminate the static charged on the touch-up surface. But it has been a big issue for workers to inhale the mist of medicament to cause a breathing problem. The use of BODY SHOP TRINC solves this problem completely.

▲Close information Catalog request CAD data request Inquiry

PELLETRINC	Features	Applications
(FOR VACUUM TRANSPORT) TAS-286 PEL	•Prevention of pellet adhesion to hopper •Prevention of color unevenness in molding •Prevention of electric shock from hose	•Resin pellet supply
A perfect solution to static problems of pellets inside the molding machines.

NEW	DUST PROTECTOR	Features	Applications
	TAS-13 DPT / TAS-14 DPT-S	•Dust prevention device for the photo sensor •Small and Light •No-blow operation	•Dust prevention and static elimination of photo sensor
	Protects the photo sensor from dust adhesion.

BODYSHOP TRINC	Features	Applications
TAS-360 BODYSHOP	•Powerful static elimination •Wide range static elimination •Easy maintenance with one-touch cleaner	•Automobile repair shop
Anti-static and anti-dust measures for automobile repair shop.

Product Informatoin

Resin Application

Powder Transportation

Print / Feeder

Parts Feeder

Sensor application

Bodyshop

NEW	STATIC MARK TRINC	Features	Applications
	TAS-1449 STM	•High static mark prevention effect •Air compressor not required •Easy installation	•Resin mold factory
	For prevention of fogging of molded products. Prevents fogging of lenses and covers.

MOLD TRINC	Features	Applications
TAS-307/308/309/310 MOLD	•No-blow ionizing •Heat resistant •Powerful static elimination	•Resin mold factory
Static eliminator specialized for resin molding solves all at once the static and dust troubles at molding.

ROUTER TRINC	Features	Applications
TAS-153 ROUTER	•High concentration ions •Prevention of cutting-chip adhesion	•Modeling machine •Router machine
Prevention of the cutoffs of routers or modeling machines from adhering.

POWDER TRANSPORTING TRINC	Features	Applications
TAS-141 POWDER	•Prevention of powder condensation •Prevention of powder adhesion •Prevention of electric shock from hose	•Powder supply
A Perfect solution to static problems on powder transportation.

SHEET/PAPER FEEDER TRINC	Features	Applications
TAS-282 SPF	•Powerful static elimination •Available for stacked sheet	•For all sheet feeders •Food packaging •Pharmaceutical packing
The problems long believed incurable on printing machines, like "misfeed" and "unevenness of cutting edges of papers", are all solved.

PRINTER TRINC	Features	Applications
TAS-350 PRINTER	•Ultra-compact and lightweight •No-blow ionizing •High accuracy and high speed ionizing	•Ink jet printer •Laser printer •Multi function printer
An ionizer to improve the printing quality of ink jet printers has come on stage.

PARTS FEEDER TRINC	Features	Applications
TAS-124 PFA / TAS-125 PFI	•Powerful static elimination •Static elimination between parts and bowl •Foreign-matter removal effect	•Parts feeder
Concerns and problems over parts feeders are solved thoroughly.