TAPE TRINC
TAS-281 TAPE

Installation into narrow space becomes possible.

Features		Applications
■No-Blow ionizing ■Space-saving ■Powerful ionizing ■Super low power consumption		■Printing machine ■Sheet cutter ■Screen printing ■Film printing machine

TAS-281 TAPE-XXXXis a successor to TAS-280 TAPE-XXXX.
 

TAPE TRINC Effective ionizing area (without air blow)

Lenght	155	250	390	530	950	1510	1930
Length(mm)	360	540	680	820	1240	1800	2230
Depth(mm)	700
Ionizing performance	Approx. 1.0 seconds (measured at center, 100mm off, using a charge plate monitor set at 20pF without air-blow )

▲Close information  Catalog request   CAD data request   Inquiry  

PLATE BAR TRINC
TAS-283 PLT

Ultra-thin type static ionizer
Capable of being installed into equipment or the narrow space made between devices.

Applications
■Ultra-thin type ■No-Blow ionizing ■Powerful ionizing ■Remote static ionization ■Space-saving ■Super low power consumption		■Printing machine ■Sheet cutter ■Screen printing ■Film printing machine ■ESD measures ■Other general purpose

PLATE BAR TRINC Effective ionizing area (without air blow)

Bar size	155	250	390	530	950	1510
Length(mm)	360	540	680	820	1240	1800
Depth(mm)	700
Ionizing performance	Approx. 1.0 seconds (measured at center, 100mm off, using a char ge plate monitor set at 20pF without air-blow)

▲Close information  Catalog request   CAD data request   Inquiry  

PRINTER TRINC
TAS-350 PRINTER

An ionizer to improve the printing quality of inkjet printers has come on stage.

Features		Applications
■Ultra-small size and light weight ■Ultra-low cost ■No-Blow TRINC adopted ■High precision static elimination ■High speed static elimination ■Abnormality monitoring function installed ■Safety design ■Ultra-low power consumption ■Ideal for large inkjet printers		■Inkjet printer ■Laser printer ■Chemical factory ■Complex machine

Conventional printers are mainly of a laser printer type using a laser, which uses a photosensitive drum to transfer the latent image onto paper, so that deterioration of the print quality due to electrostatic discharge has not been a major problem. Nowadays, as the mainstream of the printer turns into an inkjet printer type, the problem that static on the paper causes the droplet trajectory of the ultra-small ink droplet to go out of order and deteriorates the print quality has come under scrutiny. Therefor the necessity of eliminating the static charged on the paper with high precision has arisen. Since the antistatic brush that has been used conventionally as a countermeasure of this problem cannot eliminate static properly, another problem that residual static deteriorates the print quality has come up. In addition, there has been a problem of papers getting jammed and not aligned to one side due to the adsorption by static. Even with many problems like this, the printers are designed in a space-saving mechanism so tightly as to have no space to put the conventional ionizers into the chassis. This has made it difficult to take countermeasures. This time, to solve these problems, TRINC has developed a "PRINTER TRINC” that is capable to eliminate static in high precision and high-speed manner in spite of the ultra-thin and compact size built in low cost.

▲Close information  Catalog request   CAD data request   Inquiry  

HIGH HEAT-RESISTANT BAR TRINC (High heat-resistant 200℃)
TAS-306 BA-HT200

Eliminate static electricity without air-blow inside the high temperature space like the drying furnace.
Adoption of materials and configuration excellent in heat resistance. Here is the heat-resistant ionizer that TRINC technique has ever embodied.

Features		Applications
■No-Blow ionizing ■Heat-resistant construction ■Super low power consumption ■Powerful ionizing		■Painting factory (Drying furnace) ■Assembling plant ■Chemical factory ■Pharmaceutical factory

The high voltage generating unit is isolated from the ion-bar. Placing the ion bar close to the work pieces which requires to be ionized and having the high voltage generating unit close at operator's hand, AS-306 BA-HT200 can be operated with the ion-bar alone put into the inaccessible place.

HIGH HEAT-RESISTANT BAR TRINC Effective ionizing area (without air blow)

Bar size	250	390	530	950	1230	1510
Length(mm)	330	470	610	1030	1310	1590
Depth(mm)	1000
Ionizing performance	Approx. 1.0 second (measured at center, 100mm off, using charge plate monitor set at 20pF without air blow)

▲Close information  Catalog request   CAD data request   Inquiry  

STREAMLINED BAR TRINC
TAS-354 BAST / TAS-355 BAWST

Free from Karman vortexes with streamlined barform.
STREAMLINED BAR TRINC, a No-Blow bar type, doesn’t disturb a laminar flow so as to be optimum for the clean environment.

Features		Applications
■Ultra-thin type ■No-Blow ionizing ■Streamlined bar ■Powerful ionizing ■Space-saving ■Super low power consumption		■Clean room ■Clean bench ■Dust-proof dressing room ■Office ■Air-conditioner louver

STREAMLINED BAR TRINC (Power-intensified Model) Effective ionizing area (without air blow)

Bar size	250	390	530	950
Length(mm)	540	680	820	1240
Depth(mm)	700
Height(mm)	400
Ionizing performance	Approx. 1.0 second (measured at center, 100mm off, using a charge plate monitor set at 20pF without air blow)

STREAMLINED BAR TRINC (Wide Range Model) Effective ionizing area (without air blow)

Bar size	250	390	530	950
Width(mm)	φ3000（イオンバーを中心に半径1500）
Depth(mm)
Height(mm)	400
Ionizing performance	Approx. 2.0 second (measured at center, 600mm off, using a charge plate monitor set at 20pF without air)

▲Close information  Catalog request   CAD data request   Inquiry  

APPROVED EXPLOSION-PROOF BAR TRINC
TAS-36 BAM-EPA

Much safer with further intensified explosion-protection performance.
A new approved explosion-proof ionizer for anti-static/dust measures in the dangerously flammable atmosphere.

Features		Applications
■Explosion-proof ■Super wide area ionizing ■Super low power consumption ■One-touch cleaner		■Painting / Printing ■Tire manufacturing ■Petrochemical plant ■Fine particle manufacturing ■Rubber manufacturing ■Car body repairing

TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.

The more flammable a location is, the more likely static is built up.
Once an explosion or a fire occurs, all the measures taken go back to square one. TRINC has developed a new approved explosion-proof ionizer with a further improved explosion-protection performance as compared with the conventional.

▲Close information  Catalog request   CAD data request   Inquiry  

N2 BAR TRINC
TAS-1284 BAM-N2-300

The world first "N2 BAR TRINC" that operates in the nitrogen atmosphere

Features		Applications
■World first ionizer that operates in the nitrogen atmosphere ■No-Blow ionizing ■High precision static elimination ■High durability due to no-leakage structure ■Small sized ionizer head ■Super low power consumption		■Organic EL ■Lithium-ion battery ■Nitrogen atmosphere processing